公司资讯
脱标机的操作及注意事项
2021.04.10

脱标机是通过电动机带动动刀刀盘高速旋转,在动刀高速转动的过程中与定刀,形成相对运动的趋势,利用动刀与定刀之间形成的间隙,造成塑料粉碎剪切的切口,从而将大块塑料进行破碎,破碎后的塑料通过筛网对塑料颗粒大小进行过滤输出。

In the process of high-speed rotation of the moving knife, a relative movement trend is formed between the moving knife and the fixed knife. The gap between the moving knife and the fixed knife is used to create a plastic crushing and shearing incision, so as to crush large pieces of plastic. The broken plastic is filtered through the screen to output the size of plastic particles.
1、脱标机不宜24小时连续作业,机器温升过高时,可适当停机冷却;电动机正在运行时绝不可打开、清理或修理脱标机;启动脱标机电动机,运转正常后进行投料。脱标机停机前应停止进料,但电机还应继续运转一段时间,直到确保脱标机完全空了再停机。

1. It is not suitable to operate continuously for 24 hours. When the temperature rise of the machine is too high, it can be shut down for cooling. When the motor is running, it is not allowed to open, clean or repair the machine. Start the motor of the machine and feed after it runs normally. The feeding should be stopped before the off label machine stops, but the motor should continue to run for a period of time until the off label machine is completely empty.
2、投料应均匀,脱标机避免投入大料发生卡阻现象,一旦发生卡阻,应立即停车排除。开车时应注意电机负荷电流显示表,确保脱标机电机不超载。脱标机停机时应即使清理脱标机内外废料。若发现脱标机异常噪音声响,应立即停车检查。
2. The feeding should be uniform. The label stripping machine should avoid blocking when putting in large materials. In case of blocking, it should be stopped immediately. Attention should be paid to the motor load current indicator when driving to ensure that the motor is not overloaded. When the off label machine is shut down, the waste inside and outside the off label machine should be cleaned. In case of abnormal noise of the label remover, stop the machine immediately for inspection.
3、脱标机特点:自动对模切后的各种普通纸板、塑片、皮革制品进行清废,具有结构紧凑、制造精良、压力大、精度高、使用方便、操作安全可靠,很大的降低了使用者的劳动强度,减少了劳动力成本,适用于印刷、包装装潢、塑料行业生产之用。
3. Features of label stripping machine: it can automatically remove all kinds of common paperboard, plastic sheet and leather products after die cutting. It has the advantages of compact structure, excellent manufacturing, high pressure, high precision, convenient use, safe and reliable operation, greatly reducing the labor intensity and labor cost of users. It is suitable for printing, packaging and decoration, and plastic industry production.