公司资讯
鑫涛机械带您详细了解脱标机
2021.04.10
1:使用寿命长:此款脱标机外壁采用耐磨锰钢材料,防磨损层设计,寿命延长3年;
1: Long service life: the outer wall of the label remover is made of wear-resistant manganese steel, and the anti-wear layer is designed to extend the service life by 3 years;
2:损耗低:转速合理,瓶嘴完好,无破损,两级吸风出标签,标签纸内无瓶圈;
2: Low loss: reasonable rotation speed, good bottle mouth, no damage, two-stage suction out label, no bottle ring in label paper;
3:产量大:特殊设计主机,产能在4吨每小时;
3: Large output: specially designed mainframe, with a capacity of 4 tons per hour;
4:脱标率99%以上:动刀及定刀专利技术,可自由调节间隙距离;
4: More than 99% off standard rate: patent technology of moving knife and fixed knife, free adjustment of clearance distance;
5:分离干净:采用新型可拆换双吸式分离机,吸纸顺畅,无卡机现象;分离率达到99%以上,分离出来的标签纸无盖无碎瓶,瓶圈数量极少;
5: Clean separation: a new detachable double suction separator is adopted, which can absorb paper smoothly without jamming; the separation rate is more than 99%, the separated label paper has no cap, no broken bottle, and the number of bottle rings is very small;
6:便利性:脱标机主机采用错位开门,检修机器无死角,刀板整体装配,拆装更加方便;
6: Convenience: the main machine of off label machine adopts dislocation door opening, no dead angle for maintenance machine, and the cutter board is assembled as a whole, which is more convenient for disassembly and assembly;

7:刀具寿命:动刀采用双面合金焊接合金刀,定刀焊接高性能耐磨合金,刀片使用寿命更长,不换刀,大大节省了拆装磨刀的时间;

7: Tool life: the moving tool adopts double-sided alloy welding alloy tool, and the fixed tool is welded with high-performance wear-resistant alloy. The service life of the blade is longer, and the time of disassembly and grinding is greatly saved without changing the tool;